ANTI GLARE BACKGLASS / PLEXI - BALLY/WILLIAMS

Bied hier alles aan en wat je zoekt voor arcade en consoles.
Post Reply
User avatar
Akuma2000
Active Level:
Active Level:
Posts: 584
Joined: Fri Dec 12, 2014 15:38

ANTI GLARE BACKGLASS / PLEXI - BALLY/WILLIAMS

Post by Akuma2000 » Fri Aug 14, 2015 15:46

Een winkel stuurde mij een anti-glare backglass met een breuk/scheur erin.
Na geen reacties op mijn mail uiteindelijk mijn geld terug gekregen via een claim.
Plaats ik een nieuwe bestelling voor een nieuwe backglass (verzendkosten nam ik maar voor lief), weigeren ze mijn bestelling :?

Dus heb ik deze maar via mijn werk in grotere aantallen ingekocht en heb nu een aantal over.

Prijs: €25,-
Verzendkosten NL: €6,50
Verzendkosten BE: €7,50
Of ophalen in Rotterdam.

Eigenschappen van de backglass:

Anti-glare surface
The sheet has a slightly matted anti-glare surface on one side, which diffuses reflections from the environment (windows or lamps for example).

Extremely weather-resistant and highly transparent extruded sheet material made from acrylic (polymethylmethacrylate, PMMA).
• Maximum UV protection,
• Complete transparency and true color rendition,
• Low weight,
• Increased break resistance.
• provides maximum light transmission in the visible wavelength of 380-780 nm.

UV Protection
Aggressive UV radiation (from sunlight or halogen light) is the main cause of color fading or aging and embrittlement of all kinds of materials.
This plexi sheet offers UV protection of at least 99.7 % (at a sheet thickness of 3 mm).
It therefore offers major benefits for glazing UV-sensitive artworks and objets d‘art as compared with conventional picture glazing (UV protection < 40 %).

The light transmission is 92 %. Moreover, it has no inherent color (such as a greenish, yellowish or greyish tinge), unlike other glazing products. That ensures absolutely true color rendition of the art objects behind the glazing.

Low Weight
Lightweight, high-performance plastic.
At the same thickness, it weighs only half as much as conventional picture glass.

Increased Break Resistance
It can be considered as safety glass. Its break resistance is up to eleven times higher than that of conventional picture glass. That prevents artworks from being damaged by broken glass.



Mijn eigen foto's met iPhone gemaakt, het ziet er in echt uiteraard veel scherper en mooier uit!

Image

Image



Vergelijking met normaal glas en de anti-glare plexiglas:

Image

Image
Image
User avatar
Cageman
Active Level:
Active Level:
Posts: 5044
Joined: Wed May 27, 2009 20:17
Location: Netherlands, Breda

Re: ANTI GLARE BACKGLASS / PLEXI - BALLY/WILLIAMS

Post by Cageman » Fri Aug 14, 2015 16:03

Mooi spul! Is het makkelijk te bewerken? Zou ideaal zijn om voor een LCD in een cab te zetten.
User avatar
Akuma2000
Active Level:
Active Level:
Posts: 584
Joined: Fri Dec 12, 2014 15:38

Re: ANTI GLARE BACKGLASS / PLEXI - BALLY/WILLIAMS

Post by Akuma2000 » Fri Aug 14, 2015 16:10

Eerste foto zijn de platen blauw, maar daar zit natuurlijk nog de bescherm folie op :)
Platen zijn gewoon helemaal transparant.

Het is goed te bewerken, met een decoupeerzaag kan je het op maat zagen (ik heb nu de platen laten zagen door de fabrikant).
Overigens heb ik binnenkort een 100w Laser snijder op de zaak met werkbereik van ruim een vierkante meter, dan kan ik alles netjes uitlaseren :)
Image
User avatar
Anunaki
Active Level:
Active Level:
Posts: 1156
Joined: Sat Nov 03, 2012 16:04
Location: Spijkenisse

ANTI GLARE BACKGLASS / PLEXI - BALLY/WILLIAMS

Post by Anunaki » Fri Aug 14, 2015 17:10

Nice kun je ook gaten en ronde kanten laseren?
User avatar
Akuma2000
Active Level:
Active Level:
Posts: 584
Joined: Fri Dec 12, 2014 15:38

Re: ANTI GLARE BACKGLASS / PLEXI - BALLY/WILLIAMS

Post by Akuma2000 » Fri Aug 14, 2015 17:34

Yes, als je een DXF bestandje kan aanleveren kan alle vormen uit plexi/acryl gesneden worden.
(helaas niet door metalen, daarop kan wel gegraveerd worden)
Image
User avatar
Anunaki
Active Level:
Active Level:
Posts: 1156
Joined: Sat Nov 03, 2012 16:04
Location: Spijkenisse

ANTI GLARE BACKGLASS / PLEXI - BALLY/WILLIAMS

Post by Anunaki » Fri Aug 14, 2015 18:38

Dat kan gewoon met illustrator dus dat is mooi. Ik app je we ff binnenkort
Post Reply